Tag Archives: Wedding gift

Hand Engraved YETI Tumblers

The Perfect Groomsman Gift – A Hand Engraved YETI

 

What started as a small favor for a friend has turned into a common engraving request.   Hand Engraving wildlife and scenes on the sides of YETI brand Stainless steel tumblers.   I originally had the request but I decided to get a tumbler of my own to research the possibility.

 

IMG_0989

 

IMG_1023
The steel engraved well with a small round carbide burr and was a media very open to engraving the wildlife scenes I love to cave in Gun stocks.   I started out with Elk and Coues Deer engraving  and also some Ornate Initials.

IMG_1016photo_5

IMG_1020IMG_1022

 

Coues Deer, Mule Deer, Desert wildlife scenes, or just Initials – they are only limited to your imagination.   These Hand Engraved YETI Tumbler make great gifts for all occasions, Birthdays, Groomsman Gifts, Christmas, Graduation, Promotions, Etc.   If you would be interested in this type of gift, drop me an email to discuss it.

Thanks for Stopping’ by…

Lance

Custom Carved His & Hers Shotguns

Matching Ithaca Model 37 Custom Carved Shotguns

 

This is a carving commission like none other I have ever had.   This gentleman wanted to give a wedding gift to a good friend that would truly be one to be remembered forever.

unnamed6

 

He wanted to give the Bride & Groom, His and Hers shotguns and have them custom carved and matching.   When we talked initially, he had not decided on a make or model of shotgun for the gift but only knew that there had to be beautiful wood on the shotguns.  

unnamed4

He did decide on the shotguns by Ithaca Gun and the Model 37 pump shotgun.    He went directly to the manufacturer and by doing that he was able to custom order a higher grade of wood for the stocks.  He ordered a Ladies Featherlight and a Trap Model, both the model 37 Pump.  

Here is a little info on the shotguns from the Ithaca Website.  

20Gauge_Woman_Stock_550

 

 

 

Model 37® Ladies Stock

Ithaca Gun is proud to introduce the new Model 37® Featherlight® with Ladies Stock. The gun features a unique drop of comb, drop of heel, cast pitch, and toe out. Since this stock is designed for women shooters, the ergonomics make it comfortable and well-fitting for women. It is available in 20 gauge only.

The Ladies Stock project began in December 2008 from a simple conversation with a firearm instructor who was disappointed that no manufacture offered an off the shelf firearm that would fit the average woman. We took this as a challenge and set out to build it with the input from many people both in and outside of our industry.

Trap6040web_550

 

 

 

Model 37® Trap Model

The Trap Model holds all the features as the traditional Model 37 with the exception that it comes with a Monte Carlo style stock. This stock can also come with an adjustable comb.

 

Ithaca actually shipped the finished stocks directly to me.    The plan was then for me to complete my work, then ship the custom carved stocks back to Ithaca to be fitted to the shotguns and then be shipped to the client – all in time for the wedding.

unnamed7

The wood Quality and Beauty was fantastic and while the guns were being ordered and produced, my client and I finalized the carving designs on the stocks.   He chose Basketweave, Oak Leaves, and Acorns.  To make the two guns matching yet slightly different, I designed the Basketweave on the Brides stock slightly smaller in scale, and the leaves were to be carved in a bit different style.  Both had the same elements, but different enough to see His & Hers easily.  Also I added a Monogram of the Bride and Groom’s initials were added to their respective stocks, as well as the Wedding date.

unnamed16

The first step was to remove the checkering on the buttstock and forearm.   This was very touchy work on the forearm since the wood was very thin in this area.  I had the barely shave the checkering off to have enough wood to still carve the Basketweave into this area.  The buttstock was thicker, hence more forgiving, allowing me to carve the weave area with no worries of totally penetrating the wood.   All Leaf carving outside of the basketweave area was carved in an inlaid style with no exterior relief.   This allowed for showing off as much of the beautiful wood grain of the stock as possible.    I had suggested not to do any scenes on the off side of the buttstock because the stock wood was just too pretty to carve over.  The client agreed.

After the carving was complete and the carvings finished, the stocks were shipped back to Ithaca and then on to the client.   I am looking forward to some photos from him showing the bride & groom with their shotgun.

 

If I can help you with an extraordinary gift for someone who really deserve one, drop me an email.

 

Thanks for Stoppin’ by …

Lance

 

 

A Custom Carved Wedding Gift

Custom Carved Weatherby stock for a Wedding Gift

 

       I received an email a few months ago from a woman who wanted to surprise her fiance on their wedding day with a custom carved gunstock for one of his rifles.    After we did some design work and found the right subject matter she started looking for the right rifle and stock for this project.  

 

      With the help of some of her future in-laws,  she found and old Weatherby Mark V that was in the family and had a stock that needed some refinishing TLC, but had truely beautiful grain in the Walnut stock.

 

      The subject matter was Whitetail Deer in a meadow and she wanted me to have the family Cabin carved in the corner of the meadow.  Many photos of the cabin area as well as the cabin itself were emailed to me to assist in the design.    the old checkering was removed and basketweave and oak leaves added in it’s place.

 3

    

     My client had planned well in advance so there was not a rush –  we could plan it and I would complete it with a month to spare.  Planning in advance like this is a luxury that I am not used to and I really enjoyed it.    Rushed work and artistic expression do not go well together.

 006-1024x768

008-1024x761 

 

 

 

 

 

 

 

 

 

     If you have ideas for personalizing an item or creating an Heirloom like this , contact me and we can discuss it.

 

Thanks for stoppin’ by…

 

Lance Larson